updated some scripts, added more

install.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sudo cp scripts/* /usr/local/bin

scripts/install.sh

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-sudo cp scripts/* /usr/local/bin

scripts/screenshot

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+SCRIPTNAME=$(basename $0)
+FILENAME="$HOME/$SCRIPTNAME-$(date +'%Y-%m-%d-%H-%M-%S').png"
+
+case ${1:-} in
+    select*|region|area) SEL="-s" ;;
+    *) SEL="" ;;
+esac
+
+maim --format=png $SEL "$FILENAME"
+echo -n $FILENAME | xclip -selection clipbard
+notify-send "Screenshot" "$(echo -e "Screen shot saved\n$FILENAME")"

scripts/xmobar-status-keyboard

@@ -0,0 +1,32 @@
+#!/bin/sh
+
+stdlayout=us  # standard layout takes "default" color
+stdname=en-us # arbitrary, descriptive only
+
+base03=#002b36
+base02=#073642
+base01=#586e75
+base00=#657b83
+base0=#839496
+base1=#93a1a1
+base2=#eee8d5
+base3=#fdf6e3
+yellow=#b58900
+orange=#cb4b16
+red=#dc322f
+magenta=#d33682
+violet=#6c71c4
+blue=#268bd2
+cyan=#2aa198
+green=#859900
+
+layout="$(xkb-switch)"
+
+case $layout in
+    ${stdlayout}) color=$green; icon=" "; name=$stdname ;; # f11c fa-keyboard-o
+    *) color=$magenta; icon=" "; name="dvorak" ;; # f11c fa-keyboard-o
+esac
+
+echo "<fc=$color><fn=1>$icon</fn> ${name}</fc>"
+
+# vim: ft=sh:expandtab:ts=4:shiftwidth=4

scripts/xmobar-status-net

@@ -0,0 +1,109 @@
+#!/bin/sh
+
+dev_wifi=wlp3s0 
+dev_eth=enp0s25 
+dev_vpn=proton0
+
+base03=#002b36
+base02=#073642
+base01=#586e75
+base00=#657b83
+base0=#839496
+base1=#93a1a1
+base2=#eee8d5
+base3=#fdf6e3
+yellow=#b58900
+orange=#cb4b16
+red=#dc322f
+magenta=#d33682
+violet=#6c71c4
+blue=#268bd2
+cyan=#2aa198
+green=#859900
+
+# connectivity status
+# states are:
+# none (no connectivity)
+# portal (behind captive portal)
+# limited (connected to network but no internet access)
+# full (full internet connectivity)
+# unknown
+
+std_color=$magenta
+wifi_icon=""
+
+connectivity="$(nmcli networking connectivity)"
+
+case $connectivity in
+    none) color=$red; icon=" " ;; # f056 fa-minus-circle 
+    portal) color=$yellow; icon=" " ;; # f05c fa-times-circle-o
+    limited) color=$yellow; icon=" " ;; # f01b fa-arrow-circle-o-up 
+    full) color=$std_color; icon=" " ;; # f0aa fa-arrow-circle-up 
+    *) color=$red; icon=" " ;; # f29c fa-question-circle-o
+esac
+
+eth="$(ip -o address | grep -i "$dev_eth *inet ")"
+if [ -n "$eth" ]
+then
+    #eth="${eth##*inet }"
+    speed="$(cat /sys/class/net/$dev_eth/speed)"
+    case $speed in
+        10) speed="10Base-T" ;;
+        100) speed="100Base-T" ;;
+        1000) speed="Gigabit" ;;
+        *) speed="UNKNOWN $speed" ;;
+    esac
+    #eth_status=" <fn=1></fn> $speed ${eth%%/*}"
+    eth_status=" <fn=1> </fn> $speed"
+fi
+
+ssid="$(iw dev $dev_wifi link | grep -i SSID)"
+if [ -n "$ssid" ]
+then
+    signal="$(iw dev wlp4s0 station dump | egrep '[^ ]signal avg')"
+    signal="${signal#*-}"
+    signal="${signal%% *}"
+    signal="$((2*(100-signal)))"
+        
+#    if   ((signal < 20))
+#    then
+#        sigicon="⠀"
+#    elif ((signal < 40))
+#    then
+#        sigicon="⣀"
+#    elif ((signal < 60))
+#    then
+#        sigicon="⣤"
+#    elif ((signal < 80))
+#    then
+#        sigicon="⣶"
+#    else
+#        sigicon="⣿"
+#    fi
+    signal=$((signal/5*5)) # get rid of some jitter
+    ((signal > 100)) && signal=100
+    #    ▁ ▂ ▃ ▄ ▅ ▆ ▇ █
+    wifi_status=" <fn=1>$wifi_icon </fn> <fc=#50fa7b>${signal}</fc>% ${ssid##*SSID: }"
+#    if [ -n "$eth" ]
+#    then
+#        wifi_ip="$(ip -o address | grep -i "$dev_wifi *inet ")"
+#        wifi_ip=" ${wifi_ip##*inet }"
+#        wifi_status="$wifi_status${wifi_ip%%/*}"
+#    fi
+fi
+
+vpn="$(ip -o address | grep -i "$dev_vpn *inet ")"
+if [ -n "$vpn" ]
+then
+    #vpn="${vpn##*inet }"
+    #vpn_status="<fn=1></fn> ${vpn%%/*}"
+    vpn_status="<fn=1> </fn> "
+    color=$green
+else
+    vpn_status="<fn=1> </fn> "
+fi
+
+echo "<fc=$color>${vpn_status}<fn=1>$icon</fn>${connectivity##*full}$wifi_status$eth_status</fc>"
+
+
+# vim: ft=sh:expandtab:ts=4:shiftwidth=4

scripts/xmobar-status-updates

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+count=$(yay -Qu | wc -l)
+
+printf "<fn=1>\ufbae </fn>%s" $count

scripts/xmobar-status-vol

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+base03=#002b36
+base02=#073642
+base01=#586e75
+base00=#657b83
+base0=#839496
+base1=#93a1a1
+base2=#eee8d5
+base3=#fdf6e3
+yellow=#b58900
+orange=#cb4b16
+red=#dc322f
+magenta=#d33682
+violet=#6c71c4
+blue=#268bd2
+cyan=#2aa198
+green=#859900
+
+color=$cyan
+volume="$(amixer sget Master | grep 'Front Left')"
+if [ "${volume}" = "${volume%\[off\]*}" ]
+then
+	volume="${volume#*\[}"
+	status="${volume%%\%\]*}"
+	case $((status/50)) in
+		0) icon="" ;; # fa-volume-down f027
+		1) icon="" ;; # fa-volume-up f028
+		*) icon=""; color=$orange ;; # fa-volume-up f028
+	esac
+else
+	status=MUTE
+	color=$red
+	icon="" # fa-volume-off f026
+fi
+echo "<fc=$color><fn=1>$icon </fn> $status</fc>"
+
+

scripts/xmobar-trayer-padding-icon

@@ -0,0 +1,48 @@
+#!/bin/sh
+# Copied from https://github.com/jaor/xmobar/issues/239#issuecomment-233206552
+# Detects the width of running trayer-srg window (xprop name 'panel')
+# and creates an XPM icon of that width, 1px height, and transparent.
+# Outputs an <icon>-tag for use in xmobar to display the generated
+# XPM icon.
+#
+# Run script from xmobar:
+# `Run Com "/where/ever/trayer-padding-icon.sh" [] "trayerpad" 10`
+# and use `%trayerpad%` in your template.
+
+
+# Function to create a transparent Wx1 px XPM icon
+create_xpm_icon () {
+    timestamp=$(date)
+    pixels=$(for i in `seq $1`; do echo -n "."; done)
+
+    cat << EOF > "$2"
+/* XPM *
+static char * trayer_pad_xpm[] = {
+/* This XPM icon is used for padding in xmobar to */
+/* leave room for trayer-srg. It is dynamically   */
+/* updated by by trayer-padding-icon.sh which is run  */
+/* by xmobar.                                     */
+/* Created: ${timestamp} */
+/* <w/cols>  <h/rows>  <colors>  <chars per pixel> */
+"$1 1 1 1",
+/* Colors (none: transparent) */
+". c none",
+/* Pixels */
+"$pixels"
+};
+EOF
+}
+
+# Width of the trayer window
+width=$(xprop -name panel | grep 'program specified minimum size' | cut -d ' ' -f 5)
+
+# Icon file name
+iconfile="/tmp/trayer-padding-${width}px.xpm"
+
+# If the desired icon does not exist create it
+if [ ! -f $iconfile ]; then
+    create_xpm_icon $width $iconfile
+fi
+
+# Output the icon tag for xmobar
+echo "<icon=${iconfile}/>"