updated dwmblocks

.local/bin/status-bat

@@ -1,5 +1,12 @@
 #!/bin/bash
 
+case $BUTTON in
+	3) notify-send "Scroll to change adjust backlight." ;;
+	4) mod_backlight up ;;
+	5) mod_backlight down ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
 icon=""
 
 IFS=" " read -ra parts <<< "$(bash-status-bat)"

.local/bin/status-clock

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+case $BUTTON in
+	1) notify-send "This Month" "$(cal --color=always | sed "s/..7m/<b><span color=\"red\">/;s|..27m|</span></b>|")" && notify-send "Appointments" "$(calcurse -d3)" ;;
+	2) setsid -f "$TERMINAL" -e calcurse ;;
+	3) notify-send "Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\`
+- Middle click opens calcurse if installed" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+echo " $(date '+%a %Y-%m-%d %H:%M')"

.local/bin/status-disk

@@ -2,7 +2,13 @@
 
 homeval=$(df -h -B 1048576 | grep "/home")
 
-if [[ ! -z $homeval ]]; then
+case $BUTTON in
+	1) notify-send "Disk space" "$(df -h --output=target,used,size)" ;;
+	3) notify-send "Disk module" "Click to show all disk info." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+if [[ -n $homeval ]]; then
 	homefreemb=$(echo "$homeval" | awk -F ' ' '{ print $4 }')
 	homefreegb=$(echo "$homeval" | awk -F ' ' '{ print $4/1024 }')
 fi
@@ -18,7 +24,7 @@ else
 	out="$out / $(printf "%0.2fGb" "$rootfreegb")"
 fi
 
-if [[ ! -z $homeval ]]; then
+if [[ -n $homeval ]]; then
 	if [ "$homefreemb" -lt 1024 ]; then
 		out="$out ~ $(printf "%0.2fMb" "$homefreemb")"
 	else

.local/bin/status-mem

@@ -0,0 +1,13 @@
+#!/bin/bash 
+
+case $BUTTON in
+	1) notify-send "Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;;
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "Memory module" "\- Shows Memory Used/Total.
+- Click to show memory hogs.
+- Middle click to open htop." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+free --mebi | sed -n '2{p;q}' | awk '{printf (" %2.2fGiB/%2.2fGiB\n", ( $3 / 1024), ($2 / 1024))}'
+

.local/bin/status-net

@@ -1,37 +1,27 @@
 #!/bin/bash
 
-dev_wifi=$(<"$HOME"/.config/net-cfg/dev_wifi)
+# Show wifi   and percent strength or 󰖪  if none.
-dev_eth=$(<"$HOME"/.config/net-cfg/dev_eth)
+# Show   if connected to ethernet or ❎ if none.
-dev_vpn=$(<"$HOME"/.config/net-cfg/dev_vpn)
+# Show 🔒 if a vpn connection is active
 
-wifi_icon=" "
+case $BLOCK_BUTTON in
+	1) "$TERMINAL" -e nmtui; pkill -RTMIN+15 dwmblocks ;;
+	3) notify-send "Internet module" "\- Click to connect
+❌: wifi disabled
+󰖪 : no wifi connection
+ : wifi connection with quality
+❎: no ethernet
+ : ethernet working
+🔒: vpn is active
+" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
 
-eth="$(ip -o address | grep -i "$dev_eth *inet ")"
+if grep -xq 'up' /sys/class/net/w*/operstate 2>/dev/null ; then
-if [ -n "$eth" ]
+    ssid="$(iw dev $(cat /proc/net/wireless | grep '^.*:' | sed 's/:.*//') link | grep -i SSID)"
-then
+	wifiicon="$(awk '/^\s*w/ { print " ", int($3 * 100 / 70) "%" }' /proc/net/wireless) ${ssid##*SSID: } "
-    speed="$(cat "/sys/class/net/$dev_eth/speed")"
+elif grep -xq 'down' /sys/class/net/w*/operstate 2>/dev/null ; then
-    case $speed in
+	grep -xq '0x1003' /sys/class/net/w*/flags && wifiicon="󰖪 " || wifiicon="❌ "
-        10) speed="10Base-T" ;;
-        100) speed="100Base-T" ;;
-        1000) speed="Gigabit" ;;
-        *) speed="UNKNOWN $speed" ;;
-    esac
-    eth_status="  $speed"
 fi
 
-ssid="$(iw dev "$dev_wifi" link | grep -i SSID)"
+printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)" 
-if [ -n "$ssid" ]
-then
-    signal="$(awk '/^\s*w/ { print int($3 * 100 / 70) "%" }' /proc/net/wireless)"
-    wifi_status="$wifi_icon ${signal} ${ssid##*SSID: }"
-fi
-
-vpn="$(ip -o address | grep -i "$dev_vpn *inet ")"
-if [ -n "$vpn" ]
-then
-    vpn_status=""
-else
-    vpn_status=""
-fi
-
-echo "${vpn_status} $wifi_status$eth_status"

.local/bin/status-packages

@@ -1,3 +1,12 @@
 #!/bin/bash
 
+case $BUTTON in
+	1) setsid -f "$TERMINAL" -e status-popupgrade ;;
+	2) notify-send "$(/usr/bin/pacman -Qu)" ;;
+	3) notify-send "Upgrade module" "Number of upgradable packages
+- Left click to upgrade packages
+- Middle click to show upgradable packages" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
 pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/ /;s/^ 0$//g"

.local/bin/status-popupgrade

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+printf "Beginning upgrade.\\n"
+
+yay -Syu
+pkill -RTMIN+8 "${STATUSBAR:-dwmblocks}"
+
+printf "\\nUpgrade complete.\\nPress <Enter> to exit window.\\n\\n"
+read -r _

.local/bin/status-vol

@@ -2,6 +2,17 @@
 
 # Prints the current volume or  if muted.
 
+case $BUTTON in
+	1) setsid -f "$TERMINAL" -e pulsemixer ;;
+	2) wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle ;;
+	4) wpctl set-volume @DEFAULT_AUDIO_SINK@ 1%+ ;;
+	5) wpctl set-volume @DEFAULT_AUDIO_SINK@ 1%- ;;
+	3) notify-send "Volume module" "\- Shows volume,  if muted.
+- Middle click to mute.
+- Scroll to change." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
 vol="$(wpctl get-volume @DEFAULT_AUDIO_SINK@)"
 
 # If muted, print 🔇 and exit.